learn to distinguish the quality of the LED corn light is very importance

Although LED corn light by office lighting consumers welcome more and more,  LED corn light market appeared a lot of poor quality of the lamps and lanterns at present,.If we do not pay attention to this problem, it is very easy to buy inferior products, so learn to distinguish the quality of the LED corn light is very importance.

1, identify the quality of LED corn light is unqualified or not, firstly should look at the appearance, ensure that the appearance of lamps and lanterns , There is no crack ,loose. When install and disassemble, cannot become loose or slanting phenomenon.Surface of lamps and lanterns use materials should be fire retardant.

2, the temperature. LED corn lights in the use of average surface temperature is relatively low, but if the cooling condition is poor, so in the case of high temperature is easy to appear the phenomenon of hot, light failure will also change, which affects the service life of lamps and lanterns.Inferior LED corn light In the process of use, can appear flashing phenomenon.

3, listen to the sound: electromagnetic compatibility of qualified LED corn lights is tested, so you can put the radio on nearby when in use of lamps and lanterns, the lower the noise of the radio to receive, clarify measured electromagnetic compatibility is better, on the contrary, the lamp is poor quality.

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more