Compared with OSram 500 w HWL Lamp，what are the advantages of LED Corn Light？

What wattage LED corn lamp could replacing existing 500W HWL lamp?

TEK’s E40 80W LED corn light bulb perfect to replacement Osram E40500W HWL lamp. Why LED corn light can replace HWL Lamp , what are the advantages of LED corn light? See the table below.
ModelTEK 80W LED corn lampOsram 500W HWL lamp
Rated Wattage80Watt530Watt
Normal Voltage100-300VAC220V/225V/235V/240V
Efficacy131lm/Watt26lm/Watt
Rated Luminous Flux11000lm (14000lm@ CRI65)14000lm
Color Rendering Index Ra8049
Color Temperature2500-6700K4100K
Lifespan>50,000hrs8000hrs
Diameter118mm122mm
Length312mm292mm
Product Weight950240g
Base (Standard designation)E27/E26/E39/E40E40/E39
Energy efficiency classA+C
Energy consumption80kWh/1000h530kWh/1000h
Lamp mercury contentNo37.4mg

We can see from the table above, The 80Watt LED corn light has a 11000lm(Ra>80) luminous flux output which is equivalent to 500W E40 HWL lamp, saving up to 87% less energy and lasting up to six times longer than traditional 500Watt mercury mixed-light lamps. Return on investment is within 6 months.
LED corn light bulbs can be used instead of incandescent lamps or HWL lamps because they do not need electromagnetic ballast( also called conventional control gear or chokes.

For more detailed application and graphics for LED corn light, please contact with us.

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more