what issues is LED high bay light installation should pay attention to?

Do you know how to install the LED high bay light is the best?During the installation process, whether you will accidentally cause energy waste or not?Let's take a look at the installation of LED high bay light when should pay attention to what issues?




First, the distribution of lamps and lanterns.The installation position of the reasonable design of lamps and lanterns, to do reasonable light distribution, don't appear dark space.Good distribution of lamps and lanterns can let a person feel the space is large, bright, no fatigue, comfortable work environment.In the construction area should be reasonable distribution of LED high bay light and choice.


Second, the LED high bay light when installed, just don't give according to the fault, some lines in the internal chip or shell design, including some tubes are in accordance with the steps to, plus some wire intervention, so at the time of use, mainly is to good to some relevant modulation, therefore to complete a better one.




Third, at the time of installation LED high bay light, the first thing to note the electrician must show certificates, so you can avoid damage to the lamps and lanterns, before installation must also check if the lamps and lanterns has certain integrity, whether can normal for installation, the lack of a component is not possible.With flammable items as far as possible to keep a certain distance installation otherwise there will be some explosion or can't normal use.


Fourth, installation and inspection on site, look at the corner have lighting, should ensure that met the requirement of the lighting lamps and lanterns.


Fifth, when installing the LED high bay light to should take put down gently, do not appear fall off phenomenon, caused the damage of lamps and lanterns.Factories in strict accordance with the requirements of the installation instructions.


LED high bay light qualified touch and the choose and buy the right after installation, can play its own advantages, to achieve expected effect, makes the workers work in a comfortable environment.Some unit of choose and buy is no quality assurance products, such as LED high bay light, a small hook if manufacturers choose quality is poor, so will appear fall off phenomenon, caused a loss of costly, but also the accident may happen.

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more