E40 200W LED Corn Light

TEK LED launches ultra bright LED corn light, high efficient, providing up to 160lm/W, 200W LED corn lamp reach to 32000lm.

TEK LED offers a wide range of high efficiency LED lamps to replacement metal halide lamps.

LED corn lamp idea to replacement metal halide lamp, high pressure sodium lamp, mercury lamp, mercury vapor lamp, incandescent lamp, compact fluorescent lamp and incandescent lamp. Ideal for facility upgrades.

TEK LED corn lamp are the most efficient LED lamps which could providing up to 150lm/Watt, producing higher brightness with a lower wattage. Produce more than 25% lumens than other standard LED lamps. In addition, excellent color rendering, Ra> 80., much better than other traditional light source color rendering index of 21, 60, 65 and 70.

TEK's LED corn lamp are available in different wattages from 20Watts to 200Watts, the 200W LED corn lamp is an excellent retrofit for a 600W HPS. LED corn lamps is an excellent retrofit for a metal halide warehouse, factory, mechanical, garages high bay lighting fixture, superior life to reduce maintenance cost. Direct retrofit for incandescent lamps and mixed light lamps in an application of public outdoor lighting, car parks, workshops, warehouse, and workshops.

200W LED corn lamp Benefits: 

More than 150lm per watt

Direct retrofit for incandescent lamps and mixed light lamps

Ideal to replacement Metal halide lamps, high pressure sodium lamps, and CFL (Ballast free, you may need to remove/bypass the ballast before replacement)

Higher efficacy and lifetime than any other traditional lamps

Idea lamp to replacement 600W-800W HID lamps

5 years warranty

1. Supper high brightness designed mogul base LED lamp, 200W, flux up to 32000lm

Special use high brightness 0.5W SMD LEDs, Lumen output>150lm/Watt

2. Mogul screw base: E39, E40

Mogul: E39 for north america, E40 in Europe

3. Color temperature:

4000K, 5000K and 6000K available.

4. Longer life to save relamping costs

The metal halide lamp's lumen depreciation, as well as optical and ballast losses.  You can find the lumen maintenance in MH's datasheet, lumen maintenance about 70% after 4000hrs, that means end of it's life. Thus, you have to replace it with a new lamp.

But LED lamp is almost free maintenance.

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more