LED corn lamp replace 250W MH in fitness center

Project: 80W LED lamp replace 250W Osram HQI-E Metal Halide in Belgium
Project Date: 2016
The Expectation:
Customer searching for a LED replacement lamp for HQI-E 250W Osram E40 socket metal halide in high bay lighting fixture.the high bay lights install in a 18feet high ceiling, they are looking for a LED replacement bulb, so do not need to remove current lighting fixture.
Lighting fixture: high bay
Lamp type: HQI-E 250W Metal Halide lamp

The Solution:
TEK's LED corn lamps are designed to replace a 70Watts to 400Watts, an easy effetive way to upgrade traditional metal halide lamp in high bay, post top lighting, wall packs, conopy lights etc.
We recommend customer to use 80W LED corn lamp 80Watt, flux>11000lm, Ra>80 E40 base, 85-277VAC. 
ModelTEK 80W LED corn bulbOsram 250W Metal Halide
Rated Wattage83Watt275Watt
Normal Voltage100-300VAC105V
Efficacy131lm/Watt72lm/Watt
Rated Luminous Flux11000lm15000lm
Color Rendering Index Ra80 (90 available)92
Color Temperature2500-6700K4200K
Lifespan>50,000hrs12000hrs
Diameter118mm90mm
Length312mm226mm
Product Weight950170g
Base (Standard designation)E27/E26/E39/E40E40/E39
Energy efficiency classA+A
Energy consumption83kWh/1000h275kWh/1000h
Lamp mercury contentNo18mg
We E40 80W LED corn light replace 250W metal halide lamp in fitness center.
The Result: 
Total 24pcs E40 80W lamps used in this project, Newly installed LED lamps delivery more efficient and precise light white significantly diminishing maintenance needs. More than 75% energy saving compared with 250W metal halide lamp. Customer could get back the invest for new led lamp within 7 months.
The Feedback:

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more