What are the factors influence workshop lighting effect?

Workshop lighting is affected by many factors, the main influencing factors are the following two:
1, lighting environment, illuminance and brightness must even, the ceiling height and the height of the installation of lamps and lanterns has certain requirements.

2 characteristics of LED high bay light,it must have very good heat resistance, color rendering and energy saving, high luminous efficiency.

Most of workshop for LED high bay light request is not high, and  more consider  light utilization efficiency and economy, so commonly used high-power LED high bay light.
Lighting engineering concept is very wide, according to the different types has landscape lighting, building lighting and road lighting, the general in the engineering application is  good quality special lamps and lanterns.Application requirements are as follows:
1, engineering lighting usually use outdoor lamp, according different place to  choose waterproof grade IP. such as TEK Lighting 1000W LED high bay light is IP65,  it can adapt to bad environment.
2, quality is the key.In addition to the material requirements as well as internal heat dissipation, it is best to take priority of radiator. TEK Lighting 1000W LED high bay light has a high quality of the radiator, is able to timely heat dissipation and protection of the life span of the lights.
3,high-power products pay attention to light bead quality, must be constant current drive, because once the installation is hard to change . TEK Lighting 1000W LED high bay light choose Cree firstly, bring a better experience to the customer.
The light pollution refers to the inappropriate way of harm the eyes by lighting.Is generally is the power of lamps and lanterns is too big, cause dazzling vertigo;As well as the inappropriate use of lamps and lanterns, put the wrong location affects the normal use.

Don't limited to the understanding of the LED high bay light, not the brighter, the better, suitable is the best, to send to friends who don't know how to make good use of the LED high bay light.TEK Lighting warm reminder: best to buy quality assurance when buying .

Comments

Post a Comment

Popular posts from this blog

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so a...
Read more

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light c...
Read more

Safe travel: TEK LED high bay light illuminate the locomotive base

Image
In recent years, China's rail transportation has been developing rapidly, and many second and third-tier cities have made great efforts to build urban subway projects, which have brought convenience to people.Subway passenger traffic is large, the operation security is always the top priority, the metro management department attaches great importance to the security of the train, and TEK LED high bay light  illuminate the locomotive base, which facilitates the maintenance and maintenance of subway vehicles. Traditional lighting there exists large droop, short service life, the problem such as glare, can't use how long will be replaced, is not only the economy, and the human eye in this light, easy to produce fatigue, especially the night repair subway locomotive, a bit not careful see not clear parts fault, cause hidden trouble.Today, many subway lines use LED high bay lights , which make lighting more efficient and more efficient.Second, can improve work efficiency, the ligh...
Read more