Using LED high bay light will reduce the power

LED high bay light is by far the most energy efficient lighting solutions, to replace the traditional industrial and mining lamp, due to its high energy efficiency, longer life, easier to transform, low maintenance cost and environmental protection.Although the traditional industrial lamp is still widely used for commercial lighting, traditional lamps has many shortcomings, the LED high bay light is the best energy-saving reconstruction of lamps and lanterns.


First of all, the traditional industrial lamp has not enough luminous efficiency.Although high pressure sodium lamp luminous efficiency than older energy-saving lamps, but was defeated by the good LED high bay lighting.100 w LED high bay lamp brightness is equivalent to 250 HPSL, its luminous efficiency is 2 times than  high pressure sodium lamp light source, which means use LED high bay lights can reduce power consumption by 50%.
Second, the traditional mining lamp life is short, in general, high pressure sodium lamp can last about 8000 hours, and LED high bay light source can last about 50000 hours, at least for 3 to 5 times that of high pressure sodium lamp life.



Third, the traditional mining lamp not environmental protection, because they contain mercury, lead and other harmful substances.When dropped, they will cause environmental pollution.LED high bay lights is green light, do not contain harmful substances, 100% environmental protection, can also be recycled material, not cause environmental pollution. And our earth is now facing a terrible environmental problems, from the traditional industrial lamp switch to LED high bay lamp, can help to protect the earth's environment.


In addition, LED high bay lighting is easy to install. More durable, more reliable than quality of high pressure sodium lamp . high-pressure sodium lamp life is short, almost every year need to replace and maintain , but LED high bay light is no this kind of situation.


At the same time, energy-saving LED lighting products are gradually accepted, retail market, shopping center and some more suitable for lighting place where need lighting a long time, such as in the factory, if you want to factory lighting energy-saving renovation, using LED high bay lights is the best choice; Than traditional industrial lamp 60%.


With the progress and development of production technology, the LED high bay lights price is falling, every year the LED high bay lighting to replace traditional industrial lamp is the trend of The Times.

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more