TEK Lighting LED bulb lights

In general, we focus on the lighting of UFO LED high bay light  in the work table while ignoring the setting of ambient lighting. Through experimental research, LED energy-saving lamps as the study environment lighting , it is found that the lighting environment of UFO LED high bay light  should be fully considered that not too dark. In the setting of primary and middle school students home lighting environment, just open the LED lighting without ambient lighting design is not science, it is easier to cause visual fatigue, thus affecting their vision health. In particular, when it comes to visual tasks involving moving eyeballs, such as copying and using a computer to move between the screen and the keyboard, the environment must not be too dark. Otherwise, the eye needs to adjust frequently to adjust to the light and dark changes, which will bring the discomfort of the eyes and the decline of work efficiency, which will increase the visual fatigue after a long time. In additio

In the hot market, the development of LED high bay light  is becoming more and more popular, and the development of all walks of life has made our country one of the leading manufacturers of LED production. Led lights are used in various fields, such as highways, parks, squares, mines, etc. In led the market today, we are also facing fierce industry competition, we not only on product excellence, of course, in the production of products, and strictly control the production process, ensure that the error of every detail, give consumers a better product experience. In terms of technology and market price, LED high bay light is not inferior to high-pressure sodium lamp, but its popularization still needs a process. Specifically, the following two aspects: First, The light effect of LED high bay light  is higher than that of high pressure sodium, which is only technical. In the market, LED industry is currently in the development of the early, bad more than good enterprise, this p

At present, with the development of society, the demand for green lighting has become more and more intense.The main products of green lighting are LED energy-saving lamps, UFO LED high bay light  and other products. But the quality of China's LED products is uneven. One of the important reasons is that the quality of the thermal conductivity is poor, the heat dissipation plate is not enough and the quality of the lamp is low. And the choice of thermal conductivity should be taken care of: should choose the conductive glue with the adhesive, this kind of glue can improve UFO LED high bay light conduction heat ability, raise the lifespan. In the past few years, UFO LED high bay light  in Europe and the United States have been very popular, and the annual export volume is very large. Many LED companies make a lot of money. But nowadays, buyers in international markets are no longer just asking for the illuminance and light sensation, they have a high demand for the quality of

LED corn light , as light source to replace incandescent lamp, by consumers in the market is more and more popular, many manufacturers also produce LED lamp , so that every family can do the ball bubble lamp, but who can truly terminal stores to open the situation, to succeed? From the perspective of sale, the commercial shopping mall is LED corn lamp, while the higher profit market is the engineering project. At that time, 3W and 9W were sold in civil shopping malls. In terms of engineering approaches, 80W and 200W sold more than the same product. And in terms of quotation, 3W  LED corn light from $3 to $15, price is different, quality must be different, so what kind of offer enable consumers to receive it, if price is lower, the more consumers like it? From the perspective of market research, it is not the lower the price, the most cost is still rational, in the pursuit of higher cost performance. Customer afraid quoted price is too low, afraid of owe good quality, $3 LED cor

LED panel light  illuminates is prove the relationship between work environment and human health, happiness and work ability. The study found that 76 percent of people with "human-oriented lighting" experiencer felt happier and 50 percent felt healthier, while 12 percent performed better in an objective experiment. Light has a significant impact on our mood and concentration, and the most important aspect of quality lighting is time. Our brains regulate our circadian rhythms based on the "light signals" of our surroundings, which control our energy levels, mood, alertness, or fatigue. When our body clock is out of sync with natural time, we become emotionally aroused, less responsive and less focused. In order to implement the human-oriented lighting solution in the survey, the LED panel light  lighting system which is beneficial to the human body's circadian rhythm is installed , can adjust the color temperature and the intensity . Several light source

Industrial lighting is closely related to personal safety and building safety. It has become the focal point of urban development. As the core of industrial lighting -- UFO LED high bay light. High lumen, lighting time and power supply quality, all of them have important influence on UFO LED high bay light . At present, there are about two aspects to the use of UFO LED high bay light: first, consciousness, the enterprise recognizes the necessity of UFO LED high bay light, but has not yet risen to a certain height. Secondly, the hardware, many UFO LED high bay light production enterprise innovation consciousness is not strong, the core components of technical levels far couldn't keep up with the LED product upgrading, product quality levels not neat, restriction on the development of the industry. At present, with the development of the UFO LED high bay light  industry, a number of enterprises like TEK have emerged in China. However, the industry's cognition of UFO LED high

In recent years, with the expansion of the market demand for LED lighting application, more benefit from the human and material cost advantage, with the support of the policy, our country has now become the world's important production base of LED high bay light . It is worth mentioning that in 2016, 51 % of the world's production value is concentrated in mainland China, and as the global production capacity of LED high bay light continues to shift to China, the value of the output of LED industry in China will continue to increase. LED as an energy conservation and environmental protection industry, in the early stage of development, it attracted a large amount of money in the promotion of national policies. In recent years, China's packaging industry has developed rapidly. After so many years of development, the domestic LED industry has been growing and growing, and a number of manufacturers such as TEK lighting have emerged. Although China is a world leader in the

In the production of mining industry, UFO LED high bay light  as the general term of mining lamps, of course, there is no concrete concept in our whole industry. There are many types of UFO LED high bay light, We can choose one suitable for ourselves. In order to meet the needs of different production tasks and the requirements for the installation of lamps, the reflector of the lamp should be able to generate a wide range of light distribution. Surface paint, glazed white color, and use aluminum, glass mirror, prism reflector made of glass, light can get wide distribution, suitable for large area, vertical or near vertical face of the workplace. For tall buildings and places, machine tool and others require a separate lighting can use prism glass, mirror glass and polished aluminum light reflector made of materials being strong of performance, narrow beam of light distribution. For the long-term and reliable work in the environment of multi-dust and humidity, UFO LED high bay

Since the reform and opening up, China's urban construction has been developing at a high speed. As a part of the urban infrastructure, the city lighting industry has also been developing rapidly. Using LED street light  improved the quality of urban human settlements environment, greatly improve the management level of the urban public service, at the same time engaged in city lighting industry related to create the good development opportunity. In the use type of urban road lighting, according to the different light source of road lighting, it can be divided into high voltage sodium lamp, LED street light, energy-saving street lamp, new xenon street lamp, etc. The current energy consumption and the global environment worsening, LED street light  with high luminous efficiency, low energy consumption, long life and high quality advantages such as light, became the first choice for environmental protection and energy saving in the field of global illumination. Since 2008, LED

TEK focuses on LED high bay light , fully into the industrial lighting market. As a solid enterprise in the field of LED lighting, it is not blind to switch to LED high bay light. First of all, the LED high bay light  market competition is fierce. TEK does not blindly spell the price with other manufacturers, but through to the domestic and foreign large-scale exhibition (Hongkong exhibition, USA LFI, UK exhibition, Frankfurt exhibition, etc.), insight into market trends and customer needs, and targeted to do a good job in product development. Secondly, TEK has a reliable and high quality r&d team in r&d.   TEK currently has 10 r&d staff and is extremely demanding on the design standards and reliability of LED high bay light. The research and development personnel have rich design experience, proficient in various standards. Relying on the strong research and development strength, TEK has broken through one technical bottleneck in the field of industrial lighting, an

Some customers are always attracted by the price and wattage when they buy lamps, this is why the government has implemented LED high bay light for a long time, but the metal halide lamp and high pressure sodium lamp are still have market. In traditional lighting, power was the priority topic. Power were considered when values we compare two bulb. Actually it was not wrong situation, because more power was more light. But technological developments makes the LEDs more efficient and increased the lumen values. In fact, 100W LED high bay light can replace 250W Metal halide lamp, because of its luminous flux is more than 12500 LM , and close to the light effect of MH. Watt is the measure of how much electricity one consumes. The lumen indicates the total light output of a light source. Used lower LED to replace tradition lamps and lanterns, that is reach this lumen value with low power consumption. Everyone feel unhappy that they have bought expensive LED high bay light , it'

Now, people's movements are more and more. Among them, Swimming is one of the most popular forms of sport and entertainment. Of course, this also makes the swimming pool into everyone's perspective. However, a good swimming pool is not only consider size, but also consider its equipment. Lighting lamps and lanterns for Swimming is very important, so TEK Lighting recommend using LED high bay light . In the past , swimming poor usually used 250W，400W Metal halide lamp or sodium lamp, and the life is very short, maintenance of the lights can be very frequently and expensive especially. Nowadays, the swimming pool abandons the traditional lamps and lanterns and uses the LED high bay light , so as to achieve the purpose of saving electricity charges. The first priority is to create a bright environment. we should pay attention to the placement of light fixtures. Generally 300 lux light level is sufficient in swimming pools. In case of competitions, 500 lux or more lighting leve

LED panel light is generally preferred for classroom lighting. Because students are stady in the daytime, and they also attend self-study in the evening, so school lights must be turned on for 10 hours per day. Generally, about 40% of electricity consumption in schools is caused by lighting. In many studies stated that there is a close relation between lighting and the performance of the students. It is important to establish good learning conditions rather than others. Because a good lighting in classrooms helps the students learn more. How to ensure enough light and save electricity is a headache for every school. In order to help schools solve this problem, TEK lighting provides a perfect lighting scheme：The whole classroom uses LED panel light . 500 LUX light level is sufficient in classroom where students spend most of their times and focus on learning. In order to draw attention to the area where the teacher is located, to contribute to the students’ concentration of 75

Many customers very pleased with oneself because of buy cheap products, they don't think they have allowed the LED high bay light manufacturer to make more money. So is that really the case?  In the years of 2010-2011, LED high bay lighting made good money for the companies in the market. The competitive environment has not developed yet so product prices and the profit margins were very high. But now increasing in competition makes the prices downward. It seems to be a positive progress for consumers. However when you analyze the situation, you can find a different fact reveals. Price competition reduces the quality of LED high bay lights  quickly. Manufacturers who claim to offer the same product at lower prices by imitating their opponents vanished from the market before their products warranty ends. Those companies give very huge damages to other manufacturers in the market. So the reality is that those who cost cheap vendors cheat their customers, they can not guarant

LED street light in the contemporary application more and more, more and more widely, the traditional street light already can not adapt to the demand of the current road lighting, more and more traditional street light out of the road lighting, green environmental protection high efficiency and energy saving LED lights gradually become the mainstream lighting lights and lanterns, convenient installation without laying cable and so on , make the LED street light is more and more fire. The structure  of LED street light   LED street light is assembled by chip, module, drive power supply and lampshade, light pole assembly and so on , components and parts through a series of processing steps, particularly can't ignore is any one link defects will lead to LED street light to reduce the overall performance, and even failure. LED street light  manufacturer Choose the suitable LED lights manufacturer is very important for Customer, nowadays industry competition is very fierce, a

Speaking of LED street light  product application and procurement, TEK said: the current of the LED street light is mainly used in outdoor lighting, according to the purpose of classification , it can be divided into: residential lighting, garden lighting, road lighting, stadium lighting and other public infrastructure. Application of LED  street light   Now LED street light application scope is very broad, everyone on the road often can see all kinds of LED lights, but also almost always choose durable nowadays residential lighting energy-saving LED lights, in general, LED street light reaches deep into the all aspects of your life. LED  street light  manufacturer Many types of LED lights behind more the development and manufacture LED street light manufacturers, so in face of many LED street lights manufacturer, how to choose proper manufacturer for your engineering need? 1,LED street light classification selection. Purchase LED street lights according to actual constructio

Lighting equipment is also gradually promoted as the development of the era, from the ancient time of drilling to the candle kerosene lamp to the present bright LED high bay light . The advent of this technological era is littered with technology-related products, The design and quality of TEK LED high bay light show a modern sense of technology. TEK LED high bay light brand should be the first time heard for a lot of people, TEK started in 2008 to do LED high bay light, is the production research and development and sales in the integration of brand, with the development of the brand believe TEK will have more new products to let everyone know and understand it. TEK is a professional lighting manufacturer, specializing in high-end and high quality LED high bay light  and other products, widely used in outdoor lighting, industrial lighting, household, commercial and other fields. TEK's products are well received and appreciated by users with excellent performance and innovat

The solar LED street l ight  buyer   must pay attention to the matter LED outdoor lighting lamps and lanterns classification is more,  solar LED street light  have solar panels and batteries, other such as chips, light pole, power and installation is the same, so this article use solar LED street light as the example for buyers to introduce some matters need to be aware of when buying. T he chip. LED chip is divided into domestic and imported, such as OSRAM and CREE chips are imported, good stability and long warranty time, domestic brands such as Epistar, cheaper price. The same lamp to select different chip price is different also, so buyers when buying LED street light must ask manufacturer general standard is what kind of chip, the price difference how many. If you pay domestic chip with the imported chips price, that is a disadvantage. C olor temperature. Solar LED street light  usually have a color temperature of 3000K-6500K, How to choose color temperature is based on

With TEK industry leading technology, LED flood light  compared with the traditional floodlights with better energy performance, better reliability, longer service life and experience a more professional lighting, is a building facade lighting, general flood lighting, area lighting and billboard lighting ideal choice. Latest breakthrough in the design of modernity adds a key competitive advantage to TEK LED flood light products. The product has a light effect of up to 130lm/W, which can be more prominent in brightness and uniformity, and actually replace the traditional 100W, 250W and 400W high pressure sodium lamps. The new LED flood light  has an IP67 protection grade ,  up to 50,000 hours and a strict dustproof waterproof, especially suitable for hard-to-reach areas such as building facade and roof billboards.In addition, LED flood light is the most lightweight LED flood light in similar products, and its weight is close to the traditional lighting lamps. TEK said: "in the

LED corn light  is using LED as the luminescent light source, compared to general lighting lamps, has more advantages. Energy conservation and environmental protection need not say, its efficiency is high and long life is in line with everybody's use of mind. The first two years, LED lighting lamps in the commercial and industrial category to get fast development, follow the skills, however, the current LED corn light  is now beginning to enter the home lighting category, and achieved good results. Currently, hinder LED corn light commodity to enter civil market factor mainly has two aspects: on the one hand, because the social awareness on LED skills and goods is still in its infancy, concerned expert survey, China can be cognitive understand LED bulbs in the average consumer share only 25%, LED corn light to all over, raising consumer awareness is still the key. On the other hand, because LED corn light prices higher than traditional lighting commodity , most home user

Nowadays, China is the world's production of lamps and lanterns, purchasing center, every year around the world LED high bay light  project purchaser to china find LED high bay light manufacturers to discuss business, Some brands of domestic brands have been able to go abroad and sell LED high bay light to the world. So, how to realize the construction of the foreign trade channel? Exhibition. Although the advent of the Internet gradually let the exhibition effect declines, but around the world each year, large and small, exhibition, represented by the Canton fair has a lot of domestic, foreign exhibition is also very much every year.The exhibition will attract a lot of outdoor buyers and dealers, and during the exhibition, the negotiation and negotiation have led to the cooperation. The advantage is that foreign trade customers are more likely to get the deal in the process of the exhibition, the insufficient place is the effect of the exhibition is weaker, and the cost i

Nowadays UFO LED high bay light  products are gradually replacing traditional lighting fixtures, and are widely used in industrial lighting, landscape lighting, commercial lighting and family lighting. What kind of UFO LED high bay light  is good? The color is more than 80, which is close to the natural light, and the color of the objects in the light is real.According to each individual's preferences, choose 3000K (warm color), 6500K (cold color) or the color temperature in between. Used the smartphone camera mode to pick out the flickering light ,if you see the glowing image like water wavy, that is flashing. The wavelength of luminescence spectra is constant and then color is same, cheap LED chips color will drift used for long periods. Manufacturers that don't have LED spectrophotometer are hard to produce pure color. Why choose products with high luminous efficacy   ? The advent of LED lamps has changed the pursuit of the idea of lighting. Lighting effect is to loo

With the development of science and technology, the streetlights in our lives are changing. Now, the most used are LED street light . Therefore, we should pay attention to the details in the installation of LED street light.So What should we pay attention to when installing LED street light?. The location of the assembly shall be near the installation site so that it can be transported after assembly.Try to avoid working on rainy days. Check the lamps and lanterns according to the shipping list.Check the parts and check for any bumps, wear, deformation and scratches, etc. LED street light post components and wear accessories must be cushioned with soft cushion to avoid unnecessary damage during installation. The upper end of LED street light  should be supported by an iron frame to facilitate the installation of the lamp rod assembly. At the time of installation of LED street light must avoid the flammability strong object, because we all know that street lamp at work will produce

With the rapid development of science and technology, the LED street light  alternatives to traditional sodium lamp lighting system for urban lighting, the energy saving efficiency can be as high as 20% above, can effectively save the city street lamp system energy consumption, and change the traditional high pressure sodium lamp is the power consumption of serious, visual effect is poor, the high maintenance cost, traffic hidden trouble more.So what components are needed for LED street lighting design? Shell: LED street light housing is aluminum alloy.The biggest feature of aluminum alloy is not rust, which is the only requirement for the installation of LED street lights in the open air.The manufacturing of LED street light  housing is mainly about beauty and heat dissipation. First, the heat dissipation is designed and then the shape is designed. Lamp bead: LED street light generally use large power LED street light, big power LED street light is to point to single lamp bead 1W

As the industry shuffles into the tail period, LED high bay light  industry enters a relatively stable development cycle, the competition between enterprises is more reflected in cost advantage. The LED high bay light manufacturer has developed so far that the price of products has fallen to freezing point due to fierce competition among enterprises. However, the rising tide of raw materials that started at the end of last year caused the upstream chip to go through several rounds of price increases, which would put a lot of cost pressure on LEDs. For the LED high bay light manufacturer, which is still improving, how to hold the profit is the most important issue for manufacturer. Perhaps, with the price of raw materials soaring, some companies have simply adopted the simple, crude and direct way of raising prices to maintain reasonable profit margins. Price increases are desirable for highly concentrated chip - end companies, but it is a bit defective for the LED high bay light m

At present, China's industrial sector is undergoing profound changes, reducing unit energy consumption and improving resource utilization, which has become a broad consensus. In this context, the new LED high bay light  with high efficiency and low power consumption are widely used in industrial production, and industrial lighting ushered in the "LED era". In the next few years, the prospect of LED high bay light market is very big, and it is expected that the market of LED high bay lights will reach more than four times of LED street lamps in 2017. It is understood that the service life of LED high bay light  can reach more than 50000 hours,energy saving 60% than traditional lamp, LED high bay light has the advantages that energy conservation and environmental protection, long service life, easy to dimming etc, has been gradually replace traditional incandescent lamp, halogen tungsten lamp, fluorescent lamp and so on become a new installation choice. From the per

TEK develop a series LED street light , which protection grade could reach IP67, seal use the clamping ring not using colloidal silica gel, put an end to aging colloid protection failure problem, independent cavity can protect electrical appliances as well as the internal cables from the external environment. Used heat conduction and heat dissipation integration design in power supply cooling for the first time, It can reduce the working temperature of the power supply by more than 10°. A variety of lenses are configured to match a wide range of light sources. The TEK adopts Philip 3030 light source and combines the 3D structure to achieve upper and lower double channel thermal conduction.  At the same time, keep the chips average temperature of 63.9 °, make it work in the best condition. TEK LED street light use high boron glass lens, can prevent the ultraviolet ray and the influence of various gases, photosynthetic efficiency are not effect by lens, the whole lamp 5 years fai

According to our survey of customers, the main factors influencing the life of LED street lighting are as follows: First, the protection grade is failure: a lot of LED street light  light source cavity have water droplets, dismantling found that due to the long time use of outdoor environment, the original sealant yellowing and aging, less sticky, due to respiratory effects, water vapor in the light source cavity to form water. In addition, the SMD lamp bead welding plate will short circuit caused by water vapor into,  single light source short circuit caused a series of circuit breakers, causing part of lamp is broken, harmful gas into lead to the light source surface is colloid sulphur corrosion, colloid cracking caused wire breaking and then lamp bad. Second, the insufficient cooling: survey found that most of LED street light  used the radiator, heat dissipation area in order to save cost, hot and cold than beyond reasonable range, the light source to set aside the cooling