Solution to life problem of LED street light
TEK develop a series LED street light, which protection grade could reach IP67, seal use the clamping ring not using colloidal silica gel, put an end to aging colloid protection failure problem, independent cavity can protect electrical appliances as well as the internal cables from the external environment.
Used heat conduction and heat dissipation integration design in power supply cooling for the first time, It can reduce the working temperature of the power supply by more than 10°. A variety of lenses are configured to match a wide range of light sources.
The TEK adopts Philip 3030 light source and combines the 3D structure to achieve upper and lower double channel thermal conduction. At the same time, keep the chips average temperature of 63.9 °, make it work in the best condition.
TEK LED street light use high boron glass lens, can prevent the ultraviolet ray and the influence of various gases, photosynthetic efficiency are not effect by lens, the whole lamp 5 years failure indexes can be controlled within 20%, and 3000k low colour temperature is most close to the sodium lamp color temperature, CRI is much higher than sodium lamp can achieve Ra80, luminous efficacy is 160 lm/w, light efficiency is the best choice for EMC contract energy management project. Currently, the TEK LED street lighting project has been applied in more than a dozen countries.
TEK LED street light compared with the traditional high pressure sodium lamp, approximate original sodium lamp color, color temperature evenness increased by light distribution design, in the case of reach national standard, power saving rate can reach more than 60%, and high colour temperature refers to the clarity and improve road traffic safety.
It is known that power warranty time is currently on the market within five years or so, by reducing power operating temperature, lower power failure rate,Put the power on the access point of the lamp, which can reduce maintenance cost.
LED street light has now become a standard alternative to the traditional street lighting in most cities around the world, and intelligent control is becoming more and more widespread and gradually deployed with LED lighting.
Used heat conduction and heat dissipation integration design in power supply cooling for the first time, It can reduce the working temperature of the power supply by more than 10°. A variety of lenses are configured to match a wide range of light sources.
The TEK adopts Philip 3030 light source and combines the 3D structure to achieve upper and lower double channel thermal conduction. At the same time, keep the chips average temperature of 63.9 °, make it work in the best condition.
TEK LED street light use high boron glass lens, can prevent the ultraviolet ray and the influence of various gases, photosynthetic efficiency are not effect by lens, the whole lamp 5 years failure indexes can be controlled within 20%, and 3000k low colour temperature is most close to the sodium lamp color temperature, CRI is much higher than sodium lamp can achieve Ra80, luminous efficacy is 160 lm/w, light efficiency is the best choice for EMC contract energy management project. Currently, the TEK LED street lighting project has been applied in more than a dozen countries.
TEK LED street light compared with the traditional high pressure sodium lamp, approximate original sodium lamp color, color temperature evenness increased by light distribution design, in the case of reach national standard, power saving rate can reach more than 60%, and high colour temperature refers to the clarity and improve road traffic safety.
It is known that power warranty time is currently on the market within five years or so, by reducing power operating temperature, lower power failure rate,Put the power on the access point of the lamp, which can reduce maintenance cost.
LED street light has now become a standard alternative to the traditional street lighting in most cities around the world, and intelligent control is becoming more and more widespread and gradually deployed with LED lighting.
Comments
Post a Comment