Which lamp can be use in swimming pool ? TEK LED high bay light is a good choice.

Now, people's movements are more and more. Among them, Swimming is one of the most popular forms of sport and entertainment. Of course, this also makes the swimming pool into everyone's perspective. However, a good swimming pool is not only consider size, but also consider its equipment. Lighting lamps and lanterns for Swimming is very important, so TEK Lighting recommend using LED high bay light.
8446-160Q9102T2-50

In the past , swimming poor usually used 250W，400W Metal halide lamp or sodium lamp, and the life is very short, maintenance of the lights can be very frequently and expensive especially. Nowadays, the swimming pool abandons the traditional lamps and lanterns and uses the LED high bay light, so as to achieve the purpose of saving electricity charges.

The first priority is to create a bright environment. we should pay attention to the placement of light fixtures. Generally 300 lux light level is sufficient in swimming pools. In case of competitions, 500 lux or more lighting level may be required.
333
Because of the unique optical properties of water media, the glare control of the swimming pool is particularly difficult, when the light reaches the water surface at a lower angle than 50 °, creates reflection and glare(so the lighting angle of swimming pool is not less than 50 °, not higher than 55 °).

In addition to glare on the surface of swimming pool, light fixtures have dazzling effect on swimmers which can be uncomfortable. Dazzling can be prevented by placing light fixtures in proper position.  Indirect lighting are the best option to prevent the dazzling. LED high bay light can be directed to walls and ceilings to provide glare-free lighting.
20160329071317
Swimming pools are moist places and should Corrosion-resistant light fixtures. Lamps and lanterns should have minimum IP 54 protection class，LED high bay light protect grade is more than IP 65, meet the requirements of the swimming pool

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more