Analyze LED street light design requirements specification

In the market, common LED street light power supply with constant current power supply, this is determined by the LED lighting material characteristics, these materials are greatly influenced by the environment, more than rated current job for a long time, can greatly shorten the service life of the lamp bead, and constant current power supply can play the role of protection current is stable.

LED street light design has the following requirements:
1240
1, the biggest characteristic of LED lighting is has the function of directional transmission light because almost all equipped with power type LED reflector, and the efficiency of the reflector are significantly higher than the efficiency of the reflectors of lamps and lanterns.

In addition, the efficiency of the self - reflector has been included in the light - effect detection of the led. LED street light as far as possible use of LED light beam transmission characteristics, the light directly into the road that have been illuminated, reuse reflector lamps and lanterns of auxiliary light distribution, to achieve the comprehensive light distribution of lamps and lanterns is very reasonable way.


It should be said that LED street light should truly meet the standard requirements of CJJ45-2006，CIE31 and CIE115 standard and the uniformity of the illumination requirement. The luminaire should contain three light matching functions to achieve a better realization.

The LED street light with reflector and reasonable beam output angle has a good photocoordination function. In the lamps and lanterns, the installation position and the direction of the emitting light can be realized in the direction of the installation position and emission light of the various leds according to the height and pavement width of the road lamps.

2, the power system of LED street light is different from the traditional light source, LED by realizing the constant current drive power, is to guarantee the normal work of a large foundation, the scheme of simple switching power supply often brings damage to LED devices.

How to tighten tightly together a group of LED safety, It is also an index to investigate the LED street light. LED to the requirement of the drive circuit is can ensure constant current output characteristics, because the LED forward junction voltage relative changes at work area is very small, so to ensure the LED drive current constant is basic guarantee for the LED constant power output.

The status quo of china the power supply voltage is not stable, driver circuit of LED street light with constant current output characteristics is very necessary, can ensure constant and prevent the super power of the LED street light output.

Comments

Post a Comment

Popular posts from this blog

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so a...
Read more

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light c...
Read more

Safe travel: TEK LED high bay light illuminate the locomotive base

Image
In recent years, China's rail transportation has been developing rapidly, and many second and third-tier cities have made great efforts to build urban subway projects, which have brought convenience to people.Subway passenger traffic is large, the operation security is always the top priority, the metro management department attaches great importance to the security of the train, and TEK LED high bay light  illuminate the locomotive base, which facilitates the maintenance and maintenance of subway vehicles. Traditional lighting there exists large droop, short service life, the problem such as glare, can't use how long will be replaced, is not only the economy, and the human eye in this light, easy to produce fatigue, especially the night repair subway locomotive, a bit not careful see not clear parts fault, cause hidden trouble.Today, many subway lines use LED high bay lights , which make lighting more efficient and more efficient.Second, can improve work efficiency, the ligh...
Read more