Which lamp is suitable for use in warehouse?

Why Warehouse can't install ordinary lamp, fluorescent lamp, halogen lamp? 
Lighting lamps and lanterns is the most widely used in the warehouse of electrical appliances.In current work, the light bulb surface has a high temperature;And the greater the power, and the higher temperature;Work time is too long, the temperature is higher.Affected by high temperature radiation light bulbs, can cause the fuel burning near;Such as direct contact with combustible, it would be easier to fire.Shall, in accordance with the relevant regulations, therefore, a room can only use the incandescent light bulb, and the power shall not be more than 60 watts;Are not allowed to be used fluorescent lamp, more not use iodine tungsten lamp and lamp.


The main reason is:

1) fluorescent lamp ballast heat dissipation is bad or unreasonable with tubes, and other accessories failure, easy to produce high temperature, the ignition fuel around; 

2) line lamp near combustible items or mobile pull lines for a long time, easy to wear insulating cause short circuit and cause fire accident; 

3) tungsten halogen lamp work, maintain the tubes work minimum temperature is 250 degrees Celsius, external temperature is higher, can be baked with combustible.

 
What kind of lighting lamps and lanterns is suitable for use in the warehouse?
we recommend people use TEK LED high bay light. LED high bay light is famous for green production and energy-saving,it is environment protection, don’t worry pollution. TEK Lighting use Cree as light source.
1, LED high bay light show high RA > 70. the traditional light source has the disadvantage of high temperature of lamps and lanterns, lamps and lanterns temperature can reach 200-200 degrees.And the LED itself is cold light source, lamps and lanterns is low temperature, more secure.

2, LED high bay light effect is high, the more energy efficient, the equivalent of 80w LED high bay ligh can replace 250w HPS.

3, LED high bay light in the unceasing innovation, the latest model of the fin type radiator industrial and mining lamp radiator design more reasonable, greatly reduce the weight of the industrial and mining lamps and lanterns, make the overall weight of the 80 w LED high bay light drops below 4 kg, and can perfectly solve  heat dissipation problems of LED high bay light.
 
 

Comments

Post a Comment

Popular posts from this blog

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so a...
Read more

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light c...
Read more

Safe travel: TEK LED high bay light illuminate the locomotive base

Image
In recent years, China's rail transportation has been developing rapidly, and many second and third-tier cities have made great efforts to build urban subway projects, which have brought convenience to people.Subway passenger traffic is large, the operation security is always the top priority, the metro management department attaches great importance to the security of the train, and TEK LED high bay light  illuminate the locomotive base, which facilitates the maintenance and maintenance of subway vehicles. Traditional lighting there exists large droop, short service life, the problem such as glare, can't use how long will be replaced, is not only the economy, and the human eye in this light, easy to produce fatigue, especially the night repair subway locomotive, a bit not careful see not clear parts fault, cause hidden trouble.Today, many subway lines use LED high bay lights , which make lighting more efficient and more efficient.Second, can improve work efficiency, the ligh...
Read more