LED hangar light replace Metal Halide at the airport


In the past year, ports, airport, aircraft maintenance hangar lighting have to choosing a very high power 1000-2000W metal halide, high pressure sodium, mercury vapor lamps.

From the specification, we can see some metal halide lamp luminous decay more than 30% AFTER 4000h, that means you have to replacement a new lamp within 6 months..

Product reference
Lamp lumen malntenance factor (LLMF) vs.operation hours

2000h
4000h
6000h
8000h
HQI-T  1000W/T
91%
86%
82%
78%
HQI-T  1000w/D
71%
58%
47%
35%
HQI-T  200W/N/I
91%
84%
80%
76%
HQI-T  2000W/N/E SUPER
79%
66%
-
-
HQI-T  2000W/N/SN SUPER
81%
67%
-
-
HQI-T  2000W/N  230V
95%
90%
85%

HQI-T  2000W/D
85%
80%
70%
60%
HQI-T  2000W/D/I
86%
75%
67%
60%

Today, you can use a LED high bay light to replacement existing metal halide as hangar lighting,
The 1000W LED high bay lighting fixture luminous flux up to 90000lm(Ra>80) which is equivalent to 2000W metal halide, saving up to 55% less energy and lasting up to eight times longer than traditional 2000W mercury lamp. 1000W LED flood light significantly reduced power consume increase lifespan.
When maintenance is required in the hangars themselves, aircraft must be stationed elsewhere to avoid any damage, but repairs must be done swiftly as time is of the essence. Therefore, energy-efficient lighting with long-rated lifetimes was determined to be ideal for the space.
1000W LED flood light High energy efficiency, low maintenance cost. Use LED flood lighting fixture to deliver equivalent illumination levels versus traditional HID lamps with a better uniformity and coverage.
1000W LED high bay light application
Upgrading lighting fixtures like high power metal halide(MH), high pressure dodium(HPS), Mercury Vapor(MV) in hangars, warehouses, gymnasium, stadium, high mast, square, mining and wharf lighting.

Comments

Post a Comment

Popular posts from this blog

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so a...
Read more

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light c...
Read more

Safe travel: TEK LED high bay light illuminate the locomotive base

Image
In recent years, China's rail transportation has been developing rapidly, and many second and third-tier cities have made great efforts to build urban subway projects, which have brought convenience to people.Subway passenger traffic is large, the operation security is always the top priority, the metro management department attaches great importance to the security of the train, and TEK LED high bay light  illuminate the locomotive base, which facilitates the maintenance and maintenance of subway vehicles. Traditional lighting there exists large droop, short service life, the problem such as glare, can't use how long will be replaced, is not only the economy, and the human eye in this light, easy to produce fatigue, especially the night repair subway locomotive, a bit not careful see not clear parts fault, cause hidden trouble.Today, many subway lines use LED high bay lights , which make lighting more efficient and more efficient.Second, can improve work efficiency, the ligh...
Read more