What are the secrets of LED street light technology?

LED lighting project has attracted the government and enterprises attention, LED street light is currently the LED development priority among priorities, for the LED technology design, there are many ways and means of design, following by the TEK lighting  to tell you the LED street lamp technology secret.

 LED street light

 1, Why LED street light must choose constant current power supply?
The characteristics of LED lighting materials determine its environmental impact. As the temperature changes, the current of LED will increase with the increase of voltage. The current of LED will also increase Long exceed the rated current, will greatly shorten the service life of the LED street light. But LED is in constant temperature and voltage variations and other environmental factors, to ensure that the current value unchanged.

2, LED street lamp power constant current accuracy
Now, LED lighting power supply market popular error to achieve constant current accuracy is + 8%, constant current error is too large. And the general requirements of LED street light power supply constant current power supply is maintained at + 3%, that is a good product.


3, the working voltage of LED street light power supply.
Recommendations for general LED street lights . The working voltage is 3.0V. After testing, most of the work is in 3.2V, so it is reasonable to calculate by 3.2V


4, the working current of LED street light power supply should be how much is the most appropriate?
For example, LED's rated current is 350Ma, some factories began to design a 350 Ma with all the current will lead to heat lamps work seriously, after repeated contrast test shows that if the designed 320Ma effect is more ideal, can reduce the heat, let more electrical energy into visible light.


5, isolation or Non isolated.
General 15W isolated power supply because of its large size, making it very difficult to put into the LED street light power supply transformer cavity, thus depends on the specific circumstances, the general can only do 15W, little than isolated 15W, and the price is very expensive.

Especially visible isolation price is not cost-effective. Non isolated is mainstream and volume can do it even smaller(minimum can reach 8mm), in fact, the security measures of non isolated do well, and there is no problem. If space permits ,you can do isolated power supply.

Comments

Post a Comment

Popular posts from this blog

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so a...
Read more

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light c...
Read more

Safe travel: TEK LED high bay light illuminate the locomotive base

Image
In recent years, China's rail transportation has been developing rapidly, and many second and third-tier cities have made great efforts to build urban subway projects, which have brought convenience to people.Subway passenger traffic is large, the operation security is always the top priority, the metro management department attaches great importance to the security of the train, and TEK LED high bay light  illuminate the locomotive base, which facilitates the maintenance and maintenance of subway vehicles. Traditional lighting there exists large droop, short service life, the problem such as glare, can't use how long will be replaced, is not only the economy, and the human eye in this light, easy to produce fatigue, especially the night repair subway locomotive, a bit not careful see not clear parts fault, cause hidden trouble.Today, many subway lines use LED high bay lights , which make lighting more efficient and more efficient.Second, can improve work efficiency, the ligh...
Read more