TEK Lighting LED bulb lights

Power plant coal conveying system when lighting retrofit scheme design fully consider the lighting effect, energy saving and safety, the work site targeted the reasonable choice of lamps and lanterns, and the key to ensure the scheme can meet the following requirements. 1 ,  Energy saving and consumption reduction. Choose LED high bay light  must achieve IP65 protection grade, can avoid splash water and dust too much to protect lamps and lanterns, through adopt high luminous efficiency light source, reduce the number of lamp, at the same time save a lot of electricity and reduce the production cost. 2 ,  Improve illumination and lighting environment. All selected products use high quality LED light source. Because it has the characteristics of high brightness, long life, free maintenance, less so in the use of lighting LED high bay light, also can work to achieve the required illuminance requirements, both from the basic maintenance amount and reduces the cost of electricity and

Solar  LED street lamp that lights up with sunlight instead of alternating current. Principle that the sun to the solar panels, usually to convert light into electricity, which in turn provide the main current of lamps and lanterns, at present due to the low conversion rate, average solar lamps can light up time is not long, usually with a smaller power LED as light source. The advantage is, use solar energy, save electricity, environmental protection. LED street lamp refer to street lamps with LED as the light source. At present, the most professional work in China is photoelectric. However, because of the street lighting, the long life should be strictly required. The advantage is small volume, provide more light source choice for the producer of lamps and lanterns, the color of the light is more diversified, the future solves the current and drive, the price problem, hoped to popularise.  LED street light  is an effective light source for energy conservation. For the choice

LED street light is developing rapidly in recent years, especially the state vigorously promote urban lighting life wisdom, people advocate in the life vigor, full of hope in the city, and then LED street light has entered the line of sight of people, but its price is not unified, including the following factors had a great influence . The cost For LED street light manufacturers, the cost will be the main factor affecting the price. The cost is the sum of the components, generally including LED light source, electrical components, signal lamp controller, signal light pole and auxiliary material, etc. The cost of each part determines the final price. Science and technology progress With the continuous improvement of technology and technology, the price of the controller of pure electronic components will definitely decrease, thus lowering the price of LED street light . Of course, other components will be accompanied by a breakthrough in the new technology to lower the price.

TEK's performance continued to grow rapidly, benefiting from the continued prosperity of the LED industry. In the future, the continued expansion of LED high bay light  will further expand market share. In addition, the industrial lighting business will be the future performance point. LED high bay light  price steadily reduces the global competition pattern further optimization. Recently, with the release of the production capacity of LED high bay light factory, many people in the industry question whether there is a risk of landslide. For that question, TEK says the price of LED high bay light should fall every year as costs continue to fall. Whether it is the active price reduction or the passive price reduction, the initiative price reduction is based on the cost reduction. Up to now, the price of TEK part of LED high bay light has decreased slightly, but the overall price and gross profit rate are basically stable. In fact, in early December 2017, the steady and smal

The environment is deteriorating, and all countries are developing clean energy. And with national economic growth, the energy increasingly prominent contradiction between supply and demand in China, the country's electricity supply began to appear the situation of serious shortage, energy conservation becomes the urgent problem. Therefore, it is of great significance to develop new high efficiency, energy saving, long life, high color index and green LED street light . Road lighting is closely related to people production and living, with the most began to speed up the process of urbanization in our country, the LED street light with a directional light, low power consumption, good drive performance, fast response, high seismic ability, long service life, and the advantages of the green environmental protection gradually into people's horizons, has now become the world's most replacement of traditional light source with advantages of a new generation of energy-saving li

Cities around the world are already experimenting with intelligent LED street lighting systems that can be remotely controlled, not only can the cost of electricity be reduced, but it can also realize demand-driven lighting and reduce carbon dioxide emissions. The current design goes even further: experts see connected lights as the nodes of smart city multi-functional communication networks. Now, the main use of street lamps is lighting, however, LED street lamp will has more functions in the future. For example, when the dustbin is full, it notifies the garbage collection service center, or records the change in traffic volume, and enters the data into the intelligent transportation system (ITS). Street lighting will no longer be an isolated area, but part of a networked urban infrastructure. Technicians can see worn parts in the distance, whenever an error or system detects a preset pattern, an alert is automatically issued to the employee, this increases the transparency

Recently, the Chicago officials confirmed that plans in the next four years, 85% street lamp replacement for the LED street light , this makes the Chicago became one of the largest city where use LED street lighting instead of traditional light . This plan replaces 270,000 high pressure sodium lamps with more energy-efficient and durable LED street light. The project is expected to cost $160 million from last year. However, it will also generate energy costs for the city council.  LED street light  manufacturers say that LED technology can reduce energy consumption by 60% to 80% and achieve investment returns in two years or less. The plan also includes a smart grid that can be instructed when the lights are not working, so residents don’t need reporting failures. Chicago mayor Rahm Emanuel said: "this is a win-win project, not only is one of the largest lighting modernization project, but also reduce residents call 311 (note: 311 is a public service center hotline)."

With the acceleration of urbanization, LED street light  have already entered the people's field of vision, you can see it everywhere in big cities, which dot the night sky of cities. However, LED street light still does not get the best use, because it has some limitations, in order to ensure that LED can play more roles in our life, we should solve these problems in future research and production and promotion. First ,  the appearance structure of lamps and lanterns. The appearance of traditional street lamp lamps is basically the same, which is generally divided into  light source and electrical appliance, but due to the particularity of LED light source and the different methods of light distribution, makes now the appearance of the LED street lamp is varied and many lamps do not meet the requirements of running, even some companies based on indoor standard applied to outdoor lamps. Secondly, the connection between LED  street  l ight  and lamp pole  has problem . At pr

Recently, wal-mart and obtain an energy-saving milestone, through the global 6000 shop, car parks, logistics companies and offices, unit 1.5 million light LED lamps and lanterns, save the energy cost of more than 100 million dollars. Since 2014, wal-mart has been carrying out the LED replacement program around the world, and now it is expanding into the parking lot, replacing outdoor lamps with LED street light . Most of the street lamps that appear in our life are LED street light, because they are more energy efficient and have a longer life. The most important thing is that they do not pollute the environment. There are a lot of lights around us that give us more illumination, and we should know more about the purchase process. For example, the price of any lamp is different. LED street light will be the best choice for energy conservation reform. Road lighting is the most important part of all our city traditional street lamps, often adopted some high pressure sodium lamp, a

At present, China's lighting consumption accounts for about 13% of the total electricity consumption, among which road lighting accounts for 25%~30% of the total power consumption. Thus, road lighting has great energy saving potential and space. In recent years, the development of LED street light  and demonstration projects have achieved great achievements in our country, and they are among the leading countries in the world. But there are also some unsatisfactory places, and exposed some problems to be improved. The quality of white LED light source is not strict and the use is improper Including the flux, light failure, light quality, thermal management, the reliability and consistency of mass products are not strict, and the domestic high power LED light blue chip failure is serious, thus causing the result of some LED street lighting engineering is bad. High cost. High power HBLED light source, and so on current market price is more expensive. In recent year

TEK lighting recently provided LED flood lighting system for two stadium. The system is flexible and convenient operation features can help field management personnel through on-site control and remote control lighting effects, reduce energy consumption and operating costs, and achieve sustainable development goals. High quality lighting effect TEK focuses on environmental sustainability and actively adopts the most advanced sustainable solutions, and the excellent course control system is the key to the project. The high pressure sodium lamps(HPS) used in the one stadium ushered in replacement cycle. The characteristic of HPS causes the whole stadium to be difficult to adjust lighting, the stadium lighting produce the full power output and waste a lot of energy. To this end, the stadium is exploring a more flexible and sustainable stadium lighting solution. The stadium currently using innovative TEK LED flood lighting system. This LED lighting system replaces the traditional

Advocate green lighting, protect environment, save energy has important meaning, China's street lights can't be changed without LED street light . Incomplete measured that more than 660 cities by road light more electricity for the whole year of about 700 million KWH, need 350 million yuan, and then increased discharge harmful carbon dioxide and sulfur dioxide gas, destroy air quality, which is not conducive to environmental protection, also aggravate the light pollution and light interference, disturb the normal work , rest and health of body and mind of people. The city's energy conservation and emission reduction cannot be separated from the traffic green lighting.  LED street lighting is an essential municipal infrastructure. The lighting of urban road lights is a major consumer of power energy, and its energy-saving effect directly affects the results of energy conservation and emission reduction. According to the relevant data, 66 percent of the cities in the Uni

In recent years, experienced long-term development and improvement technology seems to have reached a peak in the history of the long river, people are more and more familiar with LED high bay light . At the same time, LED product prices have experienced a sharp decline. For example, LED high bay light from hundreds of dollars at the beginning to tens of dollars today, and lower price of products makes the penetration rate of LED in the market reach new height. The price-performance ratio is always one of the most important guiding factors for the development of the market. From the development track of LED market, any kind of LED products cannot jump out of this development law. Indeed, high cost performance is the main driver of consumer acceptance. Nowadays, with the increasing awareness of the LED high bay light, the consumers' sensitivity to their price increases. As the price declines, LED high bay light becomes more and more popular, the foreground is favored.

The rapid growth of market demand has driven the growth of high-power LED to a certain extent. TEK as a professional engaged in research and development, production, sales and service in one of the company, swiftly to aim  UFO LED high bay light  market, and constantly increasing, strive for in this emerging field. TEK understands the law of market development and understands the role of price in the market in the same quality. We reduce the cost through technological innovation and systematic management, and then push the overall price of UFO LED high bay light down and the product penetration rate. TEK is composed of r&d team and management team from international LED brand enterprises for many years, with first-class product r&d capability and design quality control ability. In order to further improve the cost performance of UFO LED high bay light  and reduce the price of products, TEK has carried out a "disruptive revolution" in product design. Of course,

If you use a light source for a long period of time, you will gain enormous economic benefits and reduce your carbon footprint. According to the system design, the decrease of luminous flux is a normal process, but it is negligible. When the light flux decreases very slowly, the system will maintain a good state without requiring long maintenance.  Compared with other light sources in many applications, LED high bay light  are undoubtedly superior. To keep the system in good shape, consider the following five factors. E fficiency LED high bay light are manufactured and driven in a specific current range. According to its characteristics, the current LED from 350mA to 500mA can be provided. Many systems are driven by the high numerical area of the current range. Acidic conditions LED high bay light  are also vulnerable to some acid conditions, such as in coastal areas with high salt content, factories that use chemicals or manufacturing products, or in indoor swimmi

Sports lighting has taken a long way in a short time. Since 2015, nearly 25 percent of major league sports venues have switched from traditional metal halide lamps (MH) to more adaptive, more energy-efficient LED high bay light in USA. For example, the Seattle Mariners and the Texas Rangers of major league baseball , the Arizona cardinals and the Minnesota Vikings of the National Football League , and so on. There are three main reasons for the most advanced site selected LED high bay light system: improving the TV broadcast, enhancing the fan experience, and reducing the long-term operation cost. Intelligence LED high bay lighting can improve television coverage. Television played an important role in influencing the evolution of lighting. From professional sports leagues to university competitions, LED high bay light  is reinforced on television by eliminating the slow motion of stroboscopic movements (the problem is common on MH). Equipped with advanced LED lighting, these fr

LED high bay light  manufacturers large expansion, compared to medium-sized manufacturers with more obvious economies of scale. Another effect of the expansion is that the new capacity is more efficient than the previous generation, with lower average costs and the gradual marginalization of manufacturers who are unable to update their equipment. Incremental revenues and profits come from a number of areas, some of which are the market that marginal firms are leaving, and the other is the incremental demand that is stimulated by falling prices. Considering that LED high bay lights have not been reduced for two years, some demand has been restrained to some extent, and it is not impossible to increase the demand by lowering the price. Only if the price elasticity of demand can so big as described in the above model is not certain, if demand price elasticity is very small, cut down the price can't stimulate new demand growth, the logic may be is not established. Although ther

Recently, the price of LED high bay light  has been stable for two years and the trend of small increase is over, the first price reduction in two years. It is understood that the mainstream lamps of TEK all have different range of adjustment, individual varieties decline even up to 20%. The main reason for the price reduction is, of course, that the external environment of the supply of LED high bay lights for more than a year has changed. For the manufacturer, the two-year sales price is not moving, the cost is relatively low, and also has the internal conditions of the price reduction. For the downstream LED manufacturer, the cost pressure brought by the two-year price reduction has also been alleviated. Price is undoubtedly an LED high bay light  supply and demand from the demand to supply the important characterization, however is this price cut will evolve into LED high bay light industry to start a new round of bargain the competition start? Excessive reading of the pri

Why does advocate using LED tunnel light ? In the past, the traditional high pressure gas discharge light source (HID), such as high pressure sodium lamp (HPS) and metal halide lamp (MH), is the main force of tunnel lighting. The tunnel lighting scheme requires a high minimum illumination to provide a safe environment for users. Lamps must be able to provide high levels of illumination at a considerable distance from the plane, the typical installation height of highway tunnel is 5-7 meters, providing clearance for high side vehicles. HPS and MH are attractive to tunnel lighting scheme designers, providing low unit cost and high illumination. they usually each lamp power up to 400W, to meet the requirements of illumination. However, the disadvantages of HPS and MH are obvious. These two kinds of lamps consume a lot of energy, usually light quality is low, cannot provide uniform illumination in tunnel, and if occurrence breakdown, need costly maintenance plan to undertake remedi

In most outdoor lighting applications, LED prove their advantages. For tunneling applications, the point source integrated into the solid-state lighting device is particularly matched. How to solve the harsh lighting requirements by combining LED tunnel light  with lens? The words "dark" and "gray" describe the light of many road tunnels in the world, so when you see a bright tunnel with no shadows or black spots, you might wonder why all the tunnels don't have such good lighting conditions. In fact, in many parts of the world's new tunnel shows that carefully designed LED tunnel lighting can help the driver quickly and easily adjust eyesight, reducing maintenance to a minimum, in improving the quality of the light to save energy at the same time. We'll discuss some projects that demonstrate the value of solid-state lighting (SSL) based on LED, there are two main considerations for whether tunnel lighting should be upgraded with LED. Munic

Compared with traditional lighting equipment, LED street light  is a kind of environment-friendly and pollution-free, and the green lights with small energy consumption gradually penetrate into various fields of human production and life. LED street light installation is simple, do not need cumbersome power line construction, only install the light holder on the lamp post. However, LED street light needs to be maintained regularly, thus reducing the occurrence of failure. So what measures should be taken to maintain the LED street light? 1,The placement of battery must breathe freely and guard against theft, so generally installed in the lamp pole base, in LED street light work properly also check the battery charge and discharge process, at any time to observe the LED street light electrodes or wiring whether there is corrosion, if there is the phenomenon should be handled in a timely manner, to avoid unnecessary mistakes. 2,The controller and optical control equipmen

In recent years, countries vigorously promote urban lighting life wisdom, people advocate in vigor, full of hope city life, so LED street light has entered the line of sight of people, but because of the price is not unified, make a lot of manufacturers to price by themselves, so the price is not neat, so what are the factors affect the price of LED street light? Market demand : The market will have a big impact, if market demand is increase, the price is promoted, and the result is that consumers need to spend more money to buy the LED street lamps, and if there is less demand, price may fall, this is because their inventory cost is very high, really need a reasonable position. Cost : for LED street lamp manufacturers, the cost will be the main factor affecting the price. The cost is the sum of the components of LED street lamp , generally including LED light source, electrical components, signal lamp controller, signal light pole and auxiliary material, etc.

In view of the overall development trend of LED lighting, we are looking for cost performance, how to replace incandescent lamp and energy-saving lamp, and which is an alternative lighting. With the further improvement of the light effect, people are more and more concerned about the color quality of light and how to further save energy. And then we found out LED high bay light . When high quality light source appears, people will pay more attention to intelligent lighting and realize more functions, which truly reflects the inherent characteristics of LED high bay light, not just the replacement function. For development trend of the chip market, now the whole mainland China has become the world's most important LED high bay light manufacturing base, in 2017 accounted for 53% of global scale, in the next three years, China manufacturing scale will reach 70%. As is known to all, as early as in 2010 when the LED high bay light manufacturers very much, but with the inc

The LED corn lamp has a very similar appearance to the white light bulb. The whole Angle of light, high color and high luminous efficiency are its characteristics. You can replace the incandescent lamp in any time because they have the same lamp holder . Some people will feel that no matter what lamp it is, as long as it can shine，the fact is not like that. At present, many people still use CFL, because of its price is cheap, but in recent years, LED corn light application scope is expanding, because it is more energy-saving than CFL in the life, energy conservation, environmental protection, intensity of illumination, these performance that CFL can not to compared . What is the difference  between CFL  and the LED corn light ?  The luminous principle is different. CFL is a kind of fluorescent lamp, its working principle is through use of low pressure mercury vapor after the electricity release ultraviolet ray, make phosphors emit visible light. LED corn light is a kind of s

Recently, TEK  UFO LED high bay light  was tested to verify its performance.From the aspect of product size, the appearance dimension of TEK UFO LED high bay light is D350x143mm, and the luminescence face size is 350mm. The whole die cast aluminum has good heat dissipation. Get a lamps and lanterns, we usually pay attention to the basic performance parameters of products first, UFO LED high bay light working voltage is 90-305 VAC, we can find that TEK is excellent in power factor which is more than 0.95. It is well known that power factor is a factor which measures the efficiency of electrical equipment. The power factor is low, indicating that the circuit is used for alternating magnetic field conversion, which reduces the utilization rate of the equipment. TEK UFO LED high bay light  has a large power factor, which is converted from electrical energy into light energy efficiency, resulting in low power (such as heat). When different lamps and lanterns need to work on the photo

With the development of commodity economy, the prosperity of urban economy, commercial lighting design more and more attention to aesthetics and modern , more and more in the focus of attracting customers, lead the way customers shopping and provide a comfortable shopping environment. Under different lighting conditions of commercial lighting, various lighting lamps are derived. Among them, UFO LED high bay light  can create good indoor lighting atmosphere. However, in the past, the technology has restricted LED substitution traditional metal halide lamps in light efficiency and heat dissipation, which has delayed the promotion of LED application in commercial lighting. In order to further promote the application of LED in the field of commercial lighting, TEK released the commercial 100W/150W/200W/240W UFO LED high bay light to meet the replacement demand of 250W /400W/500W/600W ceramic metal halogen lamp in the aspects of lumen, color temperature. This high brightness, high lum

Most of the street lights in our lives are LED, because compare with ordinary light, LED street light  is more energy saving and convenient of course，its service life is longer, the most important thing that not appear environment pollution. Around us there are a lot of lamps and lanterns is bring us lighting, and we are in the process of buying should know more information ,such as what kind of lamps and why the price is different.  LED street light will be the best choice for energy conservation, with low power consumption, high efficiency and long life. Road lighting is the most important part of all our cities, traditional street lamps, often use some of the high pressure lamp, it's the biggest drawback is the waste of energy loss, and we in the global environment is deteriorating, day and night to air pollution, we all countries in the development of clean energy. There is a serious shortage of power supply, which is the most important problem we need to solve in the

According to the report of National economic of Cities, 66% of American Cities is committed to develop wisdom city, install the LED street light , 25% of American Cities where have not wise cities system also are exploring the new trend . What is a smart city? The answer is all-inclusive, but the key feature of smart cities is Connected City, and future smart cities may be full of sensors and cameras, allowing information to be transmitted instantaneously. Now some cities such as California, Washington has started to use, analysis of the sensor and camera to obtain information and comply with the cloud data, to solve the problem in the city contains, energy efficiency, public security, infrastructure, transport and emergency measures, etc. But how exactly is the "network" of smart cities in series?                                                                                                                                                                                

The main content and form of lamp design is light,  LED high bay light  makes lighting development get innovation, to a large extent changed our concept of lighting, so that we can free ourselves from the limitations of traditional light sources, there is greater elastic space in the creative performance of visual perception and form, more energy efficient, health and human development. Energy saving The research data shows that LED high bay light is a cold light source which has no pollution to the environment. Compared with incandescent lamps and fluorescent lamps, the efficiency of energy saving can reach over 70%. At the same brightness, the power consumption is only 1/10 of the average incandescent bulb and 1/2 of the fluorescent tube. If we replace the 50% of our current traditional lighting with LED, the electricity saved in China will be equivalent to the total amount of electricity generated by a three gorges power station, and its energy saving efficiency is considerab

With the development of LED high bay light  market, price war becomes the inevitable product of market economy. Using price weapons to seize the market has become an important means for the marketing of lighting enterprises. There is no denying the fact that the price war was once a good competitive strategy, in the industry as a whole of falling profits, disorderly price competition greatly reduces innovation and enthusiasm of the LED enterprise, leading to pathological development of the industry. In recent years, in the lighting industry presented the different levels of excess capacity, many LED high bay light  enterprise faces huge crisis of survival, lack innovation consciousness, the product homogeneity phenomenon serious, low marketing level. In the face of such predicament, the company has no choice but to reduce the price. Lighting enterprises also have to know, however, as the competition to upgrade, the upgrading of consumption, China's original price mode, can