How to select a good LED street light manufacturer ?

Both city and countryside road, now most of the road on both sides install street light, but because the number of street lamps is relatively large, so when installing street light, people will give priority to save electricity. Solar street light is one of the most energy saving light type, but many parts of the roadside shade is larger, or lack of sunshine sunshine, not suitable for using solar street light, can buy LED street light for this area. How to select a good LED street light manufacturer ? 

Select LED street light manufacturer, should check whether it has production qualification above all. Most of the LED street light belongs to the public facilities, especially on both sides of the road, most of circuits are buried in the ground, if its lighting equipment damage, still can replace alone, but if the  lines appear problem, need to dig out the line from underground, will waste of resources, and even affect the traffic. 
LED Street

In addition, it is also important to check whether meet the requirements. General requirements for LED street lights, including the overall framework requirements and lighting requirements.

The material of LED street light is mostly metallic, so you need to determine the shape, height and the diameter of pole etc. The requirements for lighting equipment are relatively high, including brightness, electricity consumption and so on. It also requires lighting equipment to be durable and, if often damaged, vehicles on the road can be vulnerable to safety accidents due to inadequate lighting.

TEK LED street light lighting from the module,light beads, power supply and so on for each component to grab, the zero air interval based on adaptive colloid assembly technology, to realize the transmission without light loss.

At the same time coupled with good light distribution design, makes the TEK LED street light on the photosynthetic efficiency, heat dissipation performance much better than peer competition, greatly saves the user's electricity, energy conservation and environmental protection in the true sense.

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more