What measures should be taken to maintain the LED street light?

Compared with traditional lighting equipment, LED street light is a kind of environment-friendly and pollution-free, and the green lights with small energy consumption gradually penetrate into various fields of human production and life.

LED street light installation is simple, do not need cumbersome power line construction, only install the light holder on the lamp post. However, LED street light needs to be maintained regularly, thus reducing the occurrence of failure. So what measures should be taken to maintain the LED street light?
Street light LED

1,The placement of battery must breathe freely and guard against theft, so generally installed in the lamp pole base, in LED street light work properly also check the battery charge and discharge process, at any time to observe the LED street light electrodes or wiring whether there is corrosion, if there is the phenomenon should be handled in a timely manner, to avoid unnecessary mistakes.


2,The controller and optical control equipment should be checked and maintained regularly.Run continuously, in order to ensure the LED street light device to check once a week, in the heavy rain, wind and other weather, timely to check whether the LED street light panels is displacement, whether the water inside the control room, if it is found that the occurrence of this kind of phenomenon should be handled in a timely manner.


3,Check whether the battery is in good condition or not.Pay attention to the waterproof measures, especially the batteries and lamp post .

4,Periodically check whether the LED street light is in normal use and whether there is any damage. For the above four problems, regular inspection can effectively prevent major accidents of LED street light. The minor problem for the LED street light, maintenance costs are relatively low, while the big problems of LED street light need to spend a higher cost to maintenance, even need to be replaced, so regular maintenance is necessary

Comments

Post a Comment

Popular posts from this blog

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light can form a
Read more

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so as to realize the uniformity of illumination.
Read more

Rule of thumb: what are the installation instructions of DALI LED high bay light?

Image
DALI LED high bay light , also known as LED warehouse light, mainly used in factory workshop, warehouse, exhibition hall, etc., have gradually entered homes, because it is using the latest LED lighting energy saving technology, high reflectivity, high power, high utilization rate of light source. But good lamps and lanterns need specification installation, to highlight its advantages, below for everyone to explain the DALI LED high bay light installation: 1，Define DALI LED high bay light installation height according to the lighting environment, because the environment will change the reflection efficiency of lamps and lanterns. Usually the height of DALI LED high bay light  should be above 5 meters, thread is not close to the lamp shell. If installation height is less than 3 meters, protective measures must be taken to prevent a vehicle to touch. 2，TEK DALI LED high bay light protection class is IP65, choose waterproof transformer, chip packaging place with high temperature resi
Read more