The TEK LED street light is used on the bridge
TEK undertook a streetlight project last year and recommended the use of IP67 LED street light, as well as the world's advanced LED street lighting and control systems.
TEK provides IP67 LED street light for the entire bridge, total of nearly 10,000 sets, can satisfy the control when a vehicle is used in the bridge brightness, illumination time, the demand of the light color temperature, conquer the street light heat dissipation problem, also make the leap of the life and reliability of street lamp.
Traditional street lamp produces a large amount of heat, heat dissipation and insulating layer, and there is a natural conflict between results heat not to go out in the lamp, LED junction [rise too high, shortened the service life of the lamps and lanterns and reliability, can cause a lot of waste of resources.
In order to solve this problem, TEK using the stamping process, which has a good heat dissipation and weighs twice as much as a normal street lamp. On the one hand, the insulation will prevent leakage and non-ferrous metal pollution. On the other hand, the heat dissipation and service life will be greatly improved. The use of this technology can be described as a new revolution in LED lighting.
First of all, the LED street light body need high temperature sintering, in the process, many factors cannot be fully charged, will lead to the lamp body rate is low, the general manufacturers to improve the yield under research and development costs. Secondly, it is the most important place for ceramic heat dissipation technology to weld the chip to the aluminum substrate while ensuring the scientific nature of the reliability, appearance and structure of the device.
Streetlights are commonly used outdoors, and the project is close to the coast. The TEK LED whole lamp adopts the powder baking process, which is bright and permanent, and is not easy to corrode. It prevents the dust from encroaching completely. The water is not seepage in the heavy rain, which is suitable for the harsh outdoor environment. LED street light through the professional wind tunnel test, at the highest wind speed 65m/s also has no deformation loosening phenomenon.
TEK LED street light has assembled the research force of optics, structure, power supply, material and control direction. It has been applied in practice all over the country, and has been a contributor to the national green energy saving enterprise.
TEK provides IP67 LED street light for the entire bridge, total of nearly 10,000 sets, can satisfy the control when a vehicle is used in the bridge brightness, illumination time, the demand of the light color temperature, conquer the street light heat dissipation problem, also make the leap of the life and reliability of street lamp.
Traditional street lamp produces a large amount of heat, heat dissipation and insulating layer, and there is a natural conflict between results heat not to go out in the lamp, LED junction [rise too high, shortened the service life of the lamps and lanterns and reliability, can cause a lot of waste of resources.
In order to solve this problem, TEK using the stamping process, which has a good heat dissipation and weighs twice as much as a normal street lamp. On the one hand, the insulation will prevent leakage and non-ferrous metal pollution. On the other hand, the heat dissipation and service life will be greatly improved. The use of this technology can be described as a new revolution in LED lighting.
First of all, the LED street light body need high temperature sintering, in the process, many factors cannot be fully charged, will lead to the lamp body rate is low, the general manufacturers to improve the yield under research and development costs. Secondly, it is the most important place for ceramic heat dissipation technology to weld the chip to the aluminum substrate while ensuring the scientific nature of the reliability, appearance and structure of the device.
Streetlights are commonly used outdoors, and the project is close to the coast. The TEK LED whole lamp adopts the powder baking process, which is bright and permanent, and is not easy to corrode. It prevents the dust from encroaching completely. The water is not seepage in the heavy rain, which is suitable for the harsh outdoor environment. LED street light through the professional wind tunnel test, at the highest wind speed 65m/s also has no deformation loosening phenomenon.
TEK LED street light has assembled the research force of optics, structure, power supply, material and control direction. It has been applied in practice all over the country, and has been a contributor to the national green energy saving enterprise.
Comments
Post a Comment