Heat dissipation problem of LED high bay light

Compared with other lighting light source, heat dissipation problems of LED high bay light particularly prominent influences on the targets of saving energy, the lamps and lanterns of heat dissipation is not good, will cause light low luminous efficiency and results in the decrease of light source of luminous flux, the illuminance values drop, indirectly reduce the illumination energy conservation index, more major is to reduce the life span of the light source.

LED high bay light heat mainly depends on the structure design, thermodynamics of buyers is difficult to determine, for example the radiator is big, does not mean that the cooling performance is good, the radiator cooling performance is good or bad depends on the efficiency of the radiator.
TEK LED
LED high bay light high surface temperature, for example, may be a good heat dissipation, heat is spread out, it is possible that the LED chip cannot spread out and cause internal heat conduction to the surface of the results after further raise the temperature.



For example, LED high bay light has good heat dissipation performance, but the environment factor of installation location makes the heat unable to realize the convection, resulting in the failure of heat dissipation capacity.

All of these factors is the reason of the heat dissipation performance is not good for the user, first of all, is not to choose the product that LED high bay light surface temperature is too high, inspection method is the hottest place on the surface of lamps and lanterns with finger stay for 3 seconds, if unable to endure the surface temperature, will consider its heat dissipation problem, the second is the lamps and lanterns is installed convection radiator location with enough space, moreover is the choose and buy the LED industrial lighting effect in more than 100 lm/w products and drive power efficiency in more than 85% of the products.

Comments

Post a Comment

Popular posts from this blog

What ways can see LED street lights to replace the high pressure sodium lamp?

Image
Under the condition of current technology,luminous efficiency of  LED street lamp  is more than high pressure sodium lamp, it is an indisputable fact that TEK LED street lamp can reach 160 LM/W. And HPS spectrum is concentrated in the yellow area, its color temperature is low, only 2000-2500 k, and relatively high color temperature such as LED, LED street light natural white temperature of 4000-5000 k, cold white is 5000-6500 k. At the same time compared with HPS, LED street lamp with high color rendering index, close to natural light in the actual lighting, can bring a person the sense of comfort. Followed by "irradiation uniformity", although the  LED street lamp  lighting is relatively concentrated, but can be by the light path of the second design, can make the light source of lamps and lanterns presents the ideal state, realize the reasonable light distribution curve adjustment, control the distribution of light, so a...
Read more

The advantage of new style TEK LED panel light is obvious

Image
TEK  LED panel light , continue to use the reflective surface luminous technology, light after secondary reflection through high light transmittance mask projection, reduce glare, the light is more soft and comfortable to the human eye to watch not easy fatigue, particularly for students who have long time exposure to indoor lighting lighting, subway passengers or office staff. The application of the patented reflective material ensures the reflection efficiency of the light, and the original high light effect of the panel light is retained to the maximum extent. In order to guarantee the reliability of the use,   the design principle of TEK LED panel light  adhering to the "maintenance", improve heat dissipation performance, reduce the LED light failure of lights and lanterns, significantly prolong the service life of the lights and lanterns, saving the maintenance cost of lights and lanterns. TEK LED panel light is more intelligent TEK LED panel light c...
Read more

Safe travel: TEK LED high bay light illuminate the locomotive base

Image
In recent years, China's rail transportation has been developing rapidly, and many second and third-tier cities have made great efforts to build urban subway projects, which have brought convenience to people.Subway passenger traffic is large, the operation security is always the top priority, the metro management department attaches great importance to the security of the train, and TEK LED high bay light  illuminate the locomotive base, which facilitates the maintenance and maintenance of subway vehicles. Traditional lighting there exists large droop, short service life, the problem such as glare, can't use how long will be replaced, is not only the economy, and the human eye in this light, easy to produce fatigue, especially the night repair subway locomotive, a bit not careful see not clear parts fault, cause hidden trouble.Today, many subway lines use LED high bay lights , which make lighting more efficient and more efficient.Second, can improve work efficiency, the ligh...
Read more